New Bull Trailers Taurus Evo low bed semi-trailer
Frosinone7636 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+39 347 726...
Show
+39 347 726 0640
+39 335 826...
Show
+39 335 826 6119
Italy 
28,000 kg
Net weight
12,000 kg
Italy, Frosinone
28,000 kg
Net weight
11,000 kg
Italy, Frosinone
28,500 kg
Net weight
10,500 kg
Italy, Frosinone
27,800 kg
Net weight
11,200 kg
Italy, Frosinone
29,000 kg
Net weight
10,000 kg
Italy, Frosinone
54,000 kg
Italy, Milan
Italy, Santerno Ravenna (RA)
Italy, Milan
39,000 kg
Italy, Ravenna
Bulgaria, Plovdiv
25,200 kg
Net weight
10,800 kg
Bulgaria, Plovdiv
Bulgaria, Plovdiv
19,300 kg
Net weight
11,000 kg
Italy, Frosinone
44,000 kg
Net weight
17,000 kg
Germany, Landsberg am Lech
50,000 kg
Net weight
8,300 kg
Ukraine, Chernivtsi
Portugal, Zona industrial de portalegre
37,500 kg
Net weight
10,500 kg
Czechia, Chrudim
78,000 kg
Net weight
12,000 kg
Turkey, Konya
54,000 kg
Net weight
8,000 kg
Turkey, Konya
Ready for delivery – Viewable in Piacenza – European Type Approved
General Overview:
Gooseneck lowbed semi-trailer equipped with electrohydraulic ramps, ideal for loading aerial platforms and rubber-tyred machinery.
Technical Specifications:
• 3 ROR axles (STEFEN – Italy) with 11-ton air suspension and drum brakes
• 1st liftable axle – 3rd self-steering axle
• High-strength steel chassis (S 420 / S 500) – Hot-dip galvanized with grey-painted side rails
• Total length: 13.70 m – Lower deck: 10.00 m
• Width: 2.54 m – Deck height: 88 cm – Kingpin height: 120 cm
• GVW: 39,000 kg – Payload: 27,800 kg – Tare: 11,200 kg
Systems and Safety:
• EBS + ASR anti-rollover braking system (Knorr Bremse)
• MultiLED II lighting system (Aspock)
• Pneumatic valve for deck height adjustment
• OMS/SAF front landing legs – Manual rear legs
Anchoring and Preps:
• 6 ring lashing points (3 per side)
• 16 recessed lashing slots on deck (8 per side)
• Additional slots on side rails
• Pre-equipped for front-mounted ramps and hydraulic winch
Mounted Accessories:
• Electrohydraulic double-piece rear ramps (3600 mm: 2400 + 1200 mm x 1000 mm), perforated steel
• Adjustable inner width from 50 cm to 4 cm – Ideal for aerial platforms and rubber-tyred vehicles
• 20 cm-deep recesses between neck and axles with steel covers
• Hot-dip galvanized chassis – Blue-painted steel rims
• 12 Continental 235/75 R 17.5 tyres – 2 toolboxes on gooseneck
Warranty and Support:
• Warranty per legal regulations
• Structural support available in Frosinone, Piacenza, Torino, Verona, Trento
• Full national assistance for ROR, Knorr Bremse, Continental, SAF, Aspock components
For information and viewing:
Phone: show contacts (Emanuele)
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Website: show contacts
Semirimorchio ribassato con collo d’oca e rampe elettroidrauliche posteriori, ideale per il carico di piattaforme aeree e macchine gommate.
Caratteristiche tecniche:
• 3 assali ROR (STEFEN – Italia) da 11 tonnellate con sospensioni pneumatiche e freni a tamburo
• 1° asse sollevabile – 3° asse autosterzante
• Telaio in acciaio alto resistenziale (S 420 / S 500) zincato a caldo con costole laterali verniciate grigie
• Lunghezza totale: 13,70 m – Piano ribassato: 10,00 m
• Larghezza: 2,54 m – Altezza pianale: 88 cm – Altezza ralla: 120 cm
• Massa complessiva: 39.000 kg – Portata utile: 27.800 kg – Tara: 11.200 kg
Sistemi e sicurezza:
• Sistema frenante EBS + ASR antiribaltamento (Knorr Bremse)
• Impianto luci MultiLED II (Aspock)
• Valvola pneumatica per regolazione altezza del piano di carico
• Piedi anteriori OMS/SAF – Piedi posteriori manuali
Ancoraggi e predisposizioni:
• 6 ganci ad anello (3 per lato)
• 16 asole di ancoraggio incassate nel pianale (8 per lato)
• Asole aggiuntive sulle costole laterali
• Predisposizione per rampe anteriori e verricello idraulico
Dotazioni installate:
• Rampe posteriori elettroidrauliche in doppio pezzo (3600 mm: 2400 + 1200 mm x 1000 mm), in acciaio forato
• Larghezza interna regolabile da 50 cm fino a 4 cm – Ideale per piattaforme e veicoli gommati
• Ribassi profondi 20 cm tra collo e assi, con coperture in acciaio
• Telaio zincato a caldo – Cerchi in acciaio verniciati blu
• 12 pneumatici Continental 235/75 R 17.5 – 2 cassette porta attrezzi in zona collo
Garanzia e assistenza:
• Garanzia secondo normativa vigente
• Supporto strutturale disponibile a Frosinone, Piacenza, Torino, Verona e Trento
• Assistenza nazionale per componenti ROR, Knorr Bremse, Continental, SAF, Aspock
Contatti:
Emanuele: show contacts
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Sito web: show contacts