New Bull Trailers Taurus Evo low bed semi-trailer
Frosinone7636 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+39 347 726...
Show
+39 347 726 0640
+39 335 826...
Show
+39 335 826 6119
Italy 
28,000 kg
Net weight
12,000 kg
Italy, Frosinone
28,000 kg
Net weight
11,000 kg
Italy, Frosinone
27,800 kg
Net weight
11,200 kg
Italy, Frosinone
27,800 kg
Net weight
11,200 kg
Italy, Frosinone
29,000 kg
Net weight
10,000 kg
Italy, Frosinone
54,000 kg
Italy, Milan
Italy, Santerno Ravenna (RA)
Italy, Milan
39,000 kg
Italy, Ravenna
Bulgaria, Plovdiv
25,200 kg
Net weight
10,800 kg
Bulgaria, Plovdiv
Bulgaria, Plovdiv
19,300 kg
Net weight
11,000 kg
Italy, Frosinone
50,000 kg
Net weight
8,300 kg
Ukraine, Chernivtsi
Turkey, Konya
Turkey, Konya
Portugal, Zona industrial de portalegre
44,000 kg
Net weight
17,000 kg
Germany, Landsberg am Lech
37,500 kg
Net weight
10,500 kg
Czechia, Chrudim
Available and viewable in Piacenza – European Type Approved
General Description:
Gooseneck lowbed trailer with rear ramps, ideal for transporting heavy machinery.
Technical Features:
• 3 ROR axles (STEFEN – Italy) with 11-ton air suspension and drum brakes
• 1st liftable axle – 3rd self-steering axle
• High-strength steel chassis S 420 / S 500 – Hot-dip galvanized
• Total length: 13.70 m – Lower deck: 10.00 m – Width: 2.54 m
• Deck height: 88 cm – Kingpin height: 120 cm
• GVW: 39,000 kg – Payload: 27,800 kg – Tare: 11,200 kg
Systems and Safety:
• EBS + ASR anti-rollover braking system (Knorr Bremse)
• MultiLED II electrical system (Aspock)
• Pneumatic valve for adjustable deck height
• SAF front legs – Manual rear legs
Loading Deck and Anchoring:
• 6 ring hooks (3 per side)
• 16 recessed lashing slots (8 per side)
• Additional slots on side rails
• Steel-covered recesses between neck and axles (20 cm deep)
Mounted Accessories:
• Two-piece electrohydraulic rear ramps (2400+1200 mm x 800 mm) with smooth sheet and rod surface for tracks
• Adjustable inner width: 90 cm to 40 cm (manual narrowing)
• Pre-equipped for front winch and gooseneck-mounted ramps
Equipment:
• 12 Continental 235/75 R 17.5 tyres with steel rims
• 2 toolboxes on gooseneck
Warranty and Support:
• Warranty per legal standards
• Technical support available in Frosinone, Piacenza, Torino, Verona, and Trento
• Main components (ROR, Knorr Bremse, Continental, SAF, Aspock) covered by nationwide service network
For information and viewing:
Phone: show contacts (Emanuele)
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Website: show contacts
Omologazione Europea – Telaio interamente zincato a caldo – Progettato per efficienza e resistenza nelle operazioni di trasporto pesante.
Caratteristiche principali:
• 3 assali ROR fissi con sospensioni pneumatiche da 11 tonnellate
• 3° asse autosterzante
• Telaio in acciaio alto resistenziale S 420 / S 500, zincato a caldo (+400 kg)
• Lunghezza totale: 13.600 mm – Lunghezza piano basso: 10.040 mm
• Larghezza: 2.550 mm – Altezza pianale: 870 mm
Sistemi e impianti:
• Frenatura EBS + sistema antiribaltamento ASR (Knorr Bremse)
• Impianto elettrico Multi LED (Aspöck)
Struttura e capacità:
• Massa complessiva: 39.000 kg
• Piedi anteriori SAF (portata statica: 20.000 kg)
• Piedi posteriori richiudibili manualmente (portata: 25.000 kg)
• Predisposizione per verricello idraulico e rampe di carico sul collo
Piano di carico e ancoraggi:
• 6 ganci ad anello da 7.000 kg
• 8 asole per legatura carico da 6.000 kg
• Ribassi tra collo e primo asse con 6 coperchi in acciaio
• 2 coppie di buche tra gli assi con coperchi (+400 kg)
Rampe e sollevatori:
• Rampe posteriori idrauliche (2400 x 600 mm), azionamento elettroidraulico, restringibili manualmente
• Opzionale: Rampe posteriori elettroidrauliche in doppio pezzo (3600 x 800 mm, +400 kg)
• Sollevatore primo asse (+50 kg)
Pneumatici e accessori:
• 12 pneumatici Continental 235/75 R 17.5 con cerchi in acciaio
• 2 cassette porta attrezzi in zona collo
Garanzia:
• 2 anni sui componenti (escluse parti soggette a usura)
Contatti:
Telefono: show contacts (Emanuele)
YouTube: show contacts
Instagram: show contacts
Facebook: show contacts
Sito web: show contacts