Fontaine 3000 fifth wheel for truck tractor




































≈ NZ$8,309
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts

In the raised position, the fifth wheel has the same strength as in the lowered position
- both types of semi-trailers can be loaded in the same way.
OPTIONS:
Lifting height to choose from (the fifth wheel always has 2 heights):
1 - 166 mm plus 104 mm = 270 mm
2 - 166 mm plus 154 mm = 320 mm
3 - 166 mm plus 206 mm = 372 mm
THE HIGHEST TECHNICAL PARAMETERS ON THE MARKET:
DD D = 130 kN (maximum pulling force, for a set of a tractor 2 axles
+ 3-axle semi-trailer DMC 40 tons it is about 90 kN - i.e. the fifth wheel has a significant reserve of strength)
DD U = 18 tons (maximum pressure on the fifth wheel, a standard 3-axle semi-trailer with a length of 13.6 m loaded to the maximum DMC presses
12 tons on the fifth wheel - the fifth wheel has a significant reserve of strength)
IN EUROPE ONLY FONTAINE PROVIDES
A 3-YEAR WARRANTY ON ALL TYPES OF SADDLES!
Professional assembly: We offer the possibility of assembly at a promotional price throughout Poland and the Czech Republic and in our service center, located at the western bypass of Poznań S11, first exit to Skórzewo. Assembly in PIT STOP mode ensures fast and professional service.
We assemble on all brands and models!
Availability and transport:
The saddle and plates are available immediately, which means you can receive them immediately.
We offer delivery in Poland for only PLN 200 net.
Assembly location: The service center is located in a convenient location at the western bypass of Poznań S11, first exit to Skórzewo. Fast and professional service provided!
Price: Price available at the auction. If you have any questions, please contact us.
Don't wait, take advantage of our offer and invest in certainty and safety! A brand new Fontaine saddle is a guarantee of reliability for years.
Contact for orders:
Joanna Kalinowska
Sales Specialist/Logistics Manager
e-mail: show contacts
tel.: show contacts
Alupart Sp. z o.o.
ul. Polna 7c, 62-070 Dąbrówka
nosnost umožňuje zapřáhnout návěsy standardní výšky.
Ve zvednuté poloze má sedlo stejnou pevnost jako ve sklopené poloze
- oba typy přívěsů lze nakládat stejným způsobem.
MOŽNOSTI:
Výška zdvihu na výběr (sedlo má vždy 2 výšky):
1 - 166 mm plus 104 mm = 270 mm
2 - 166 mm plus 154 mm = 320 mm
3 - 166 mm plus 206 mm = 372 mm
NEJVYŠŠÍ TECHNICKÉ PARAMETRY NA TRHU:
DD D = 130 kN (maximální tažná síla, pro 2nápravovou traktorovou soupravu
+ 3nápravový návěs GVM 40 tun, to je cca 90 kN - tedy točnice
má značnou rezervu síly)
DD U = 18 tun (maximální zatížení točnice, standardní návěs
3 náprava o délce 13,6 m zatížená na maximální GVW
12 tun na tocnice - má značnou rezervu pevnosti)
V EVROPĚ POSKYTUJE POUZE FONTAINE
ZÁRUKA 3 ROKY NA VŠECHNY TYPY SEDEL!
Profesionální instalace: Nabízíme instalaci za akční cenu po celém Polsku a České republice a v našem servisním středisku, které se nachází na západním obchvatu Poznaně S11, první výjezd na Skórzewo. Instalace v režimu PIT STOP zajišťuje rychlý a profesionální servis.
Montujeme na všechny značky a modely!
Dostupnost a doprava:
Sedlo a talíře jsou okamžitě k dispozici, což znamená, že je můžete okamžitě obdržet.
Nabízíme doručení v rámci Polska pouze za 200 PLN netto.
Místo instalace: Servisní středisko se nachází na výhodném místě v blízkosti západního obchvatu Poznaně S11, první výjezd na Skórzewo. Rychlý a profesionální servis zaručen!
Cena: Cena dostupná v aukci. Máte-li jakékoli dotazy, kontaktujte nás.
Nečekejte, využijte naší nabídky a investujte do jistoty a bezpečí! Zcela nové sedlo Fontaine je zárukou spolehlivosti na léta.
Kontakt ohledně objednávky:
Joanna Kalinowská
Specialista prodeje / manažer logistiky
e-mail: show contacts
tel.: show contacts
Alupart Sp. z o.
ulice Polna 7c, 62-070 Dąbrówka
Die Hubkapazität ermöglicht das Ankuppeln von Sattelaufliegern mit Standardhöhe.
In der angehobenen Position hat der Sattel die gleiche Festigkeit wie in der abgesenkten Position
- Beide Anhängertypen können auf die gleiche Weise beladen werden.
OPTIONEN:
Hubhöhe zur Auswahl (der Sattel hat immer 2 Höhen):
1 - 166 mm plus 104 mm = 270 mm
2 - 166 mm plus 154 mm = 320 mm
3 - 166 mm plus 206 mm = 372 mm
DIE HÖCHSTEN TECHNISCHEN PARAMETER AUF DEM MARKT:
DD D = 130 kN (maximale Zugkraft, für einen 2-Achs-Traktorsatz
+ 3-Achs-Sattelauflieger GVM 40 Tonnen, es sind ca. 90 kN – also eine Sattelkupplung
verfügt über eine erhebliche Kraftreserve)
DD U = 18 Tonnen (maximale Sattellast, Standard-Sattelauflieger).
3 Achser mit einer Länge von 13,6 m, beladen mit maximalem zulässigen Gesamtgewicht
12 Tonnen pro Hubsattelkupplung – der Hubsattelkupplung verfügt über eine erhebliche Kraftreserve)
IN EUROPA BIETET NUR FONTAINE
3 JAHRE GARANTIE FÜR ALLE SATTELTYPEN!
Professionelle Installation: Wir bieten die Installation zu Aktionspreisen in ganz Polen und der Tschechischen Republik sowie in unserem Servicecenter an der Westumfahrung von Poznań S11, erste Ausfahrt nach Skórzewo, an. Die Installation im PIT STOP-Modus gewährleistet einen schnellen und professionellen Service.
Wir montieren auf allen Marken und Modellen!
Verfügbarkeit und Transport:
Der Sattel und die Teller sind sofort lieferbar, das heißt Sie können sie sofort erhalten.
Wir bieten die Lieferung und Montage innerhalb Deutschland!
Installationsort: Das Servicezentrum befindet sich in verkehrsgünstiger Lage nahe der Westumfahrung der Poznań S11, erste Ausfahrt nach Skórzewo. Schneller und professioneller Service garantiert!
Preis: Preis bei Auktion verfügbar. Wenn Sie Fragen haben, kontaktieren Sie uns bitte.
Warten Sie nicht, nutzen Sie unser Angebot und investieren Sie in Gewissheit und Sicherheit! Ein brandneuer Fontaine-Sattel ist eine Garantie für jahrelange Zuverlässigkeit.
Kontakt bezüglich der Bestellung:
Joanna Kalinowska
Vertriebsspezialist/Logistikmanager
E-Mail: show contacts
Tel.: show contacts
Alupart Sp. z o.o. z o. o.
Straße Polna 7c, 62-070 Dąbrówka POLEN
emelőképessége lehetővé teszi szabványos magasságú félpótkocsik felcsatolását.
Felemelt helyzetben a nyereg ugyanolyan erősségű, mint süllyesztett helyzetben
- mindkét típusú pótkocsi ugyanúgy rakodható.
OPCIÓK:
Választható emelési magasság (a nyeregnek mindig 2 magassága van):
1 - 166 mm plusz 104 mm = 270 mm
2 - 166 mm plusz 154 mm = 320 mm
3 - 166 mm plusz 206 mm = 372 mm
A LEGMAGASABB MŰSZAKI PARAMÉTEREK A PIACON:
DD D = 130 kN (maximális húzóerő, 2 tengelyes traktorkészlethez
+ 3 tengelyes félpótkocsi GVM 40 tonna, ez kb 90 kN - azaz egy nyereg
jelentős erőtartalékkal rendelkezik)
DD U = 18 tonna (maximális nyerges terhelés, normál félpótkocsi
3 tengely 13,6 m hosszúsággal a maximális össztömegig terhelve
12 tonna nyeregenként - a nyereg jelentős erőtartalékkal rendelkezik)
EURÓPÁBAN CSAK FONTAINE BIZTOSÍT
3 ÉV GARANCIA MINDEN TÍPUSÚ NYEREGRE!
Professzionális telepítés: Akciós áron kínáljuk a telepítést Lengyelország és Csehország egész területén, valamint szervizünkben, amely a Poznań S11 nyugati elkerülőútján található, Skórzewo első kijáratánál. A PIT STOP üzemmódban történő telepítés gyors és szakszerű kiszolgálást biztosít.
Minden márkára és modellre telepítünk!
Elérhetőség és szállítás:
A nyereg és a tányérok azonnal elérhetőek, ami azt jelenti, hogy azonnal átveheti őket.
Lengyelországon belüli szállítást mindössze nettó 200 PLN áron kínáljuk.
Telepítési hely: A szervizközpont kényelmes helyen található, a Poznań S11 nyugati elkerülő útja közelében, az első kijárat Skórzewo felé. Gyors és szakszerű kiszolgálás garantált!
Ár: Az ár az aukción elérhető. Ha kérdése van, forduljon hozzánk.
Ne várjon, használja ki ajánlatunkat, és fektessen be a bizonyosságba és a biztonságba! Egy vadonatúj Fontaine nyereg évekig garancia a megbízhatóságra.
Rendeléssel kapcsolatban elérhetőség:
Joanna Kalinowska
Értékesítési szakember/logisztikai vezető
e-mail: show contacts
tel.: show contacts
Alupart Sp. z o.
utca Polna 7c, 62-070 Dąbrówka
keliamoji galia leidžia prikabinti standartinio aukščio puspriekabes.
Pakeltoje padėtyje balnas turi tokį patį stiprumą kaip ir nuleistoje padėtyje
- abiejų tipų priekabas galima krauti vienodai.
PARINKTYS:
Galima rinktis iš kėlimo aukščio (balnas visada turi 2 aukščius):
1 - 166 mm plius 104 mm = 270 mm
2 - 166 mm plius 154 mm = 320 mm
3 - 166 mm plius 206 mm = 372 mm
AUKŠČIAUSI TECHNINIAI PARAMETRAI RINKoje:
DD D = 130 kN (didžiausia traukimo jėga, 2 ašių traktorių komplektui
+ 3 ašių puspriekabė GVM 40 tonų, tai apytiksliai 90 kN - t.y. balninis ratas
turi didelį jėgų rezervą)
DD U = 18 tonų (maksimali balninio rato apkrova, standartinė puspriekabė
3 ašys, kurių ilgis 13,6 m, pakrauta iki didžiausios GVW
12 tonų vienam balnui - balnas turi didelį jėgos rezervą)
EUROPOJE TIK TIK FONTAINE
3 METŲ GARANTIJA VISŲ TIPŲ BALNELIAMS!
Profesionalus montavimas: Siūlome montuoti už reklaminę kainą visoje Lenkijoje ir Čekijoje bei mūsų aptarnavimo centre, esančiame vakariniame Poznanės S11 aplinkkelyje, pirmame išvažiavime į Skórzewo. Įrengimas PIT STOP režimu užtikrina greitą ir profesionalų aptarnavimą.
Montuojame ant visų markių ir modelių!
Prieinamumas ir transportavimas:
Balnelis ir lėkštės yra prieinami iš karto, vadinasi, galite juos gauti iš karto.
Siūlome pristatymą Lenkijos viduje tik už 200 PLN.
Montavimo vieta: aptarnavimo centras yra patogioje vietoje, netoli vakarinio Poznanės S11 aplinkkelio, pirmojo išvažiavimo į Skórzewo. Greitas ir profesionalus aptarnavimas garantuotas!
Kaina: Kaina prieinama aukcione. Jei turite klausimų, susisiekite su mumis.
Nelaukite, pasinaudokite mūsų pasiūlymu ir investuokite į tikrumą bei saugumą! Visiškai naujas Fontaine balnas yra patikimumo garantija ilgus metus.
Dėl užsakymo kreiptis:
Joana Kalinovska
Pardavimų specialistas/logistikos vadybininkas
paštas: show contacts
tel.: show contacts
Alupart Sp. z o.
gatve Polna 7c, 62-070 Dąbrówka
podnoszenia umożliwia zaczepianie naczep o standardowej wysokości.
W pozycji podniesionej siodło ma taką samą wytrzymałość jak w obniżonej
- oba typy naczep można ładować tak samo.
OPCJE:
Wysokość Podnoszenia do wyboru (siodło ma zawsze 2 wysokości):
1 - 166 mm plus 104 mm = 270 mm
2 - 166 mm plus 154 mm = 320 mm
3 - 166 mm plus 206 mm = 372 mm
NAJWYŻSZE PARAMETRY TECHNICZNE NA RYNKU:
DD D = 130 kN (maksymalna siła uciągu, dla zestawu ciągnik 2 osie
+ naczepa 3 osiowa DMC 40 ton wynosi on około 90 kN – czyli siodło
ma znaczny zapas wytrzymałości)
DD U = 18 ton (maksymalny nacisk na siodło, standardowa naczepa
3 osiowa o długości 13,6 m załadowana do maksymalnej DMC naciska
na siodło 12 ton – siodło ma znaczny zapas wytrzymałości)
W EUROPIE TYLKO FIRMA FONTAINE ZAPEWNIA
3 LATA GWARANCJI NA WSZYSTKIE TYPY SIODEŁ!
Fachowy montaż: Oferujemy możliwość montażu w promocyjnej cenie w całej Polsce i Czechach oraz w naszym serwisie, zlokalizowanym przy zachodniej obwodnicy Poznania S11, pierwszy zjazd na Skórzewo. Montaż w trybie PIT STOP zapewnia szybką i profesjonalną obsługę.
Montujemy na wszystkich markach i modelach!
Dostępność i transport:
Siodło oraz płyty są dostępne od ręki, co oznacza, że możesz je otrzymać natychmiast.
Oferujemy dostawę na terenie Polski za jedyne 200 PLN netto.
Lokalizacja montażu: Serwis znajduje się w dogodnej lokalizacji przy zachodniej obwodnicy Poznania S11, pierwszy zjazd na Skórzewo. Szybka i profesjonalna obsługa zapewniona!
Cena: Cena dostępna na aukcji. W przypadku pytań, zachęcamy do kontaktu.
Nie czekaj, skorzystaj z naszej oferty i zainwestuj w pewność i bezpieczeństwo! Fabrycznie nowe siodło Fontaine to gwarancja niezawodności na lata.
PRZY ZAMÓWIENIU 3 SIODEŁ - MONTAŻ U KLIENTA W DOWOLNEJ CZĘŚCI EUROPY GRATIS!!!!!!!
Kontakt w spawie zamówienia:
Dział Handlowy:
e-mail: show contacts:
show contacts
Alupart Sp. z o.o.
ul. Polna 7c, 62-070 Dąbrówka
capacitatea de ridicare vă permite să cuplați semiremorci de înălțime standard.
În poziția ridicată, șaua are aceeași rezistență ca în poziția coborâtă
- ambele tipuri de remorci pot fi incarcate in acelasi mod.
OPTIUNI:
Înălțimea de ridicare la alegere (șa are întotdeauna 2 înălțimi):
1 - 166 mm plus 104 mm = 270 mm
2 - 166 mm plus 154 mm = 320 mm
3 - 166 mm plus 206 mm = 372 mm
CEI MAI ÎNALTI PARAMETRI TEHNICI DE PE PIAȚĂ:
DD D = 130 kN (forța maximă de tragere, pentru un set de tractor cu 2 osii
+ Semiremorcă cu 3 osii GVM 40 tone, este de aproximativ 90 kN - adică o a cincea roată
are o rezervă semnificativă de forță)
DD U = 18 tone (sarcină maximă pe a cincea roată, semiremorcă standard
3 axe cu o lungime de 13,6 m încărcat la maxim PTB
12 tone per șa - șa are o rezervă semnificativă de rezistență)
ÎN EUROPA NUMAI FONTAINE OFERĂ
3 ANI GARANȚIE PENTRU TOATE TIPURILE DE SĂ!
Instalare profesională: Oferim montaj la un preț promoțional în toată Polonia și Republica Cehă și la centrul nostru de service, situat pe centura de ocolire de vest a Poznań S11, prima ieșire spre Skórzewo. Instalarea în modul PIT STOP asigură servicii rapide și profesionale.
Instalăm pe toate mărcile și modelele!
Disponibilitate si transport:
Șaua și farfuriile sunt disponibile imediat, ceea ce înseamnă că le puteți primi imediat.
Oferim livrare în Polonia pentru doar 200 PLN net.
Locația de instalare: Centrul de service este situat într-o locație convenabilă, lângă centura de ocolire vestică a Poznań S11, prima ieșire spre Skórzewo. Servicii rapide și profesionale asigurate!
Pret: Pret disponibil la licitatie. Dacă aveți întrebări, vă rugăm să ne contactați.
Nu astepta, profita de oferta noastra si investeste in certitudine si siguranta! O șa Fontaine nou-nouță este o garanție a fiabilității de ani de zile.
Contact in legatura cu comanda:
Joanna Kalinowska
Specialist vanzari/ Manager logistica
e-mail: show contacts
tel.: show contacts
Alupart Sp. z o.
stradă Polna 7c, 62-070 Dąbrówka