New Töke Makina feed silo tanker 32 tons capacity Aluminum/Stell - 2025 silo tank trailer

TECHNICIAL SPECIFICATIONS
Width : max. 2,550 mm
Height : max. 3,950 mm
Capacity
Geometric volume: 40-50 m³
Forwarding funnel: 3 - 5
Bulk Feed Carrier Silobase
Category : 8
Products to Carry: Bulk grains such as Chicken feed, Pallet feed, Bran, Corn, Barley, Wheat, Feed and powdered foods etc.
Operating Temperature: -20˚C + 50˚C
Certification: Machinery Safety Regulation (2006/42 / EC)
• Product type and optional equipments vary upon your selection.
Body
• Elliptical section design, high strength, imported, special alloy ST52 material,
• Monolithic seamless joints in the silobase production sector, in the special body structure, united in the lower part of the body and safe, smooth, smooth surface, unique body structure
welded by certified welders with special welding method.
• ISO 3834 welding manufacturing quality certification
• By using uninterrupted high performance robotic welding technology, the stress effects on the body and the welding errors caused by human factor are minimized and made safe
against impacts.
• W-angle body design that prevents material remains inside and enables fast unloading with single ( optional double) spiral system,
Filling / Discharge Line:
Filling Line
Top filling with filling caps opened horizontally with the help of the rail system, hinged to the filling lid neck, which is shaped as to be integral with the body.
Discharge Line
• Two separate discharge systems from the top or bottom according to the silo location,
• Discharging from the top, manually opening the unloading lids of each compartment to transfer to horizontal spirals, vertical spirals and upper discharge pipe which work independently
from each other, respectively.
Or discharge from the bottom by disabling the top discharging.
Electricity
• 120 X 60 sheet metal panel, 1 pc
• Contactors connected to motors
• Motor protection thermics
• Control device with 8 buttons (emergency stop)
• Electric cables connected to these
• Our products are compliant with TSE standards.
• Schneider or ABB brand
Hydrolic component
• 350 lt HYDROMOTOR (for rotary helix)
• 2 x 1 valve
• 6 lt HEMA pump
• Oil filter
• engine 2 HP 1400 rev / min
• 80 x 50 lift
• Hydraulic pump unit that provides the necessary energy for the movement of the discharge pipe right-left, down-up, by providing motion transmission to the hydromotor,
Control Panel and Hydraulic Control Unit
• Control panel fixed to control spirals, connected motors and hydraulic system
Paint:
• Painting with at least 2 layers of epoxy primer
• Topcoat application with 2 layers of acrylic paint
TÖKE MAKİNA reserves the right to make changes in the products. Technical information is approximate data and intended for standard product application. Dimensions may change
according to truck brand and model. Above information is not considered as an offer. Please contact us for further info.